Timers : TAG Heuer Chronoprinter 505: Difference between revisions
Jump to navigation
Jump to search
(New page: ===TAG Heuer Chronoprinter 505=== The 503 must be started the following way. Otherwise the computer will not recognize the data. :* Turn it on by moving the switch to manual :* Enter th...) |
No edit summary |
||
(2 intermediate revisions by the same user not shown) | |||
Line 1: | Line 1: | ||
==TAG Heuer Chronoprinter 505== | |||
The 503 must be started the following way. Otherwise the computer will not recognize the data. | The 503 '''must''' be started the following way. Otherwise the computer will not recognize the data. | ||
:* Turn it on by moving the switch to manual | :* Turn it on by moving the switch to manual |
Latest revision as of 06:43, 17 October 2009
TAG Heuer Chronoprinter 505
The 503 must be started the following way. Otherwise the computer will not recognize the data.
- Turn it on by moving the switch to manual
- Enter the time of day (military time). For example if it was 2:35pm enter 1435 then press Enter
- For 'Precision?' press Enter which will accept as 1/1000. It must be set to 1/1000!
- The solid black lines on the display indicate the inputs are blocked. To unblock them press each of the red buttons at the bottom of the keyboard once.
- Start the timer by pressing one of the green buttons or an impulse on input 1.