Timers : TAG Heuer Chronoprinter 503

From SplitSecond
Jump to navigation Jump to search

TAG Heuer Chronoprinter 503

The 503 must be started the following way. Otherwise the computer will not recognize the data.

  • Turn it on by moving the switch to manual
  • Enter the time of day (military time). For example if it was 2:35pm enter 1435 then press Enter
  • For 'Precision?' press Enter which will accept as 1/1000. It must be set to 1/1000!
  • Press '1' to take the option for 'Split'
  • The solid black lines on the display indicate the inputs are blocked. To unblock them press each of the red buttons at the bottom of the keyboard once.
  • Start the timer by pressing one of the green buttons or an impulse on input 1.
  • Start - Input 1
  • Finish - Input 2

back to list of timers